Parts & Accessories

Yakima's Chain Straps are replacement bike holding straps for various models of Yakima's trunk and hitch racks. The stretchy, sturdy rubber is easy on your bike's finish and is extremely durable for long life.

Yakima's DeadLock protects you in two important ways: first, it locks the outside bike to the rack with a cable and steel pin so all your bikes are safe and secure. Second, it locks the hitch-mounted rack to the vehicle so the rack can't get stolen, either. Plus, there's a universal key so you can easily unlock your bikes and rack as needed.

- Fat straps are used to carry over sized (fat) tire bikes on Two/Four Timer bike racks. - Includes two straps - Weight: 0.44 lbs. - Dimensions: L 15.50 in x W 1.00 in x H 18 in

Yakima's Glass Hatch Hook is an alternative strap for "Joe" series racks used on cars where standard hooks cannot be used.

Yakima's HandCuff keeps your bikes secure when attached to the SwingDaddy and RidgeBack (both sold separately). Plus, there's a universal key and an additional SKS Lock Core so you can have the same key that locks your bikes to the rack and your rack to the hitch.

Safety and wheel straps for Joe Pro series strap racks. Includes one each.

Yakima SKS (Same Key System) Lock Cores secure all lockable Yakima rack systems, cargo boxes, and accessories. It's your gear, keep it that way. - Fits all lockable accessories - Includes 8 SKS Cores and matching keys - 2 keys included plus a control key

Yakima's Trunk-Mount Security Strap is a steel-reinforced strap that lets you secure your trunk rack to your vehicle.

With Thule's Fat Tire Kit for T2 Racks you can finally throw your fat bike on your Thule rack (sold separately) and head for the hills. Oversize wheel trays accommodate tires up to 5-inches wide and the tray has been shaped to work perfectly with even the widest treads. An extra-long wheel strap is included to make fastening your rear wheel a breeze. This kit attaches easily to your Thule T2 hitch rack (sold separately) and includes the mounts needed for a single bike.

Custom fit kit for mounting a Thule roof rack to vehicles without pre-existing roof rack attachment points, or factory-installed racks. - Check the Thule Buyer's Guide to find out which fit kit fits your car - Compatible with Thule Evo Clamp and Thule Edge Clamp foot packs - Fit kit for vehicles without pre-existing roof rack attachment points or factory-installed racks

The Swagman LOCKING THREADED HITCH PIN is specifically designed to prevent theft and wobble for Swagman's rack with threaded 1-1/4" and 2" receiver bar. - High-security key allows for easy access with only a half-turn to unlock - Premium chrome-plated for maximum rust protection - Keeps Swagman hitch racks secure and stable - Unique hidden pin cylinder for added security - Fits 1 1/4" and 2" Universal-foot-equipped Swagman racks - Threaded

- High security key allows for easy access with only a half-turn to unlock - Premium chrome plating for maximum rust protection - 7.5 ft. long 10mm security cable with hitch pin adapter

The Swagman LOCKING THREADED HITCH PIN is specifically designed to prevent theft and wobble for Swagman's rack with threaded 2" receiver bar. - High-security key allows for easy access with only a half-turn to unlock - Premium chrome-plated for maximum rust protection - Unique hidden pin cylinder for added security - Fits 2" only equipped racks - Threaded

- High security key allows for easy access with only a half-turn to unlock - Premium chrome plated for maximum rust protection - 8.5 ft. long 10mm security cable with hitch pin adapter

The Swagman eBike/Cruiser Bar Adapter creates a higher top tube for your bike by attaching below the stem and seat post of your bikes. This will allow the ratcheting arms of your bike to hold step-through and heavier-weight bikes securely by grabbing onto the adapter. - Fits: Cruiser, eBikes and Step Through bikes requiring a higher top tube for use on Platform Hitch Mount Racks. - Max Load: 35 lbs. per bike when used on a Hanging Rack - Telescopic bar fits multiple bike sizes - Adapter comes equipped with vinyl-coated hangers - User friendly quick release - 25"-31" Maximum Width

Whether it’s a city bike with a step-through frame or full-suspension mountain bike, some bikes just may not work well with a car rack that suspends the bike from its top-tube. Swagman's Deluxe Bar Adapter changes that. This telescopic bar hooks under the stem and around the seatpost to create a "top tube" that the rack can hold. It features vinyl-coated, quick release hooks so it's gentle on your bike and easy to use. The 19-inch Deluxe Bar expands up to 26-inches in length.

Ensure you have the ability to carry all your bikes with their different front axle standards with these Impakt Adaptor Cores. Used with Swagman's Impakt fork mount system, these cores are available in the popular thru-axle sizes found on today's road, mountain, gravel, and fat bikes.

Swagman's Impakt Fork Mount makes transporting your bike easy. This aluminum fork mount fits 9-20mm axles (20mm adapter sold separately) so you can fit everything from your road bike to your downhill sled. This fork mount features two mounting holes so you can bolt it just about anywhere.

The Swagman Horizontal RV Bike Bag - Large is new and improved with larger volume to allow for wider handle bars and a greater variety of hitch-mounted tray-style racks including our Escapee. Constructed of super-tough, water-resistant 420 D Nylon. Covers up to 2 bikes on any RV hitch-mounted rack. Not for use on regular vehicles, only RV, 5th Wheels & Travel Trailers. - Constructed of super tough, water-resistant 420 D Nylon - Covers up to 2 bikes - Not to be used on the back of a vehicle. The main issue is wind, putting the RV bag on the back of a regular vehicle (non-RV) subjects it to an excessive force from the wind, which will likely tear/shred the bag, but also puts an undue load on the bike rack and the bikes which can lead to the rack failing or damage to the bikes. - Ensure that bike and covers are clear of exhaust pipes and that the cover can't get caught in any moving parts on the vehicle.

Adapt your Swagman bike rack to accommodate fat bikes with wheel holders that fit extra-wide tires. - For use with Swagman's XTC 2 & XTC 4 bike racks - XTC 2 & XTC 4 Fat Bike Wheel Holder (set) 1 left, 1 right wheel holder

- Updated design, for use with all Saris racks where bikes are secured by the top tube - Bridges the gap from stem to seat tube, creating a virtual top tube - Useful on ladies and specialty frames

Saris' Hatch Huggers fasten Saris racks (sold separately) to certain vehicles. They replace the regular straps for vehicles with glass hinge lines and vehicles with narrow gaps around the trunk.

Utilizing RockyMounts premium 3-axis anti wobble system; Allows BackStage, MonoRail, and SplitRail racks to fold flat against vehicles with spare tires. Works well for bike racks including Thule, Yakima & Kuat. Product Features: - Extends rack 8 inches from receiver - Only for 2-inch hitch receivers - Uses RockyMounts 3-axis anti wobble system - Reduces vehicle hitch capacity by 50% - Ideal for vehicles with spare tires, recessed hitches or van doors - Includes locking hitch pin with premium lock pod, can be keyed alike - 10lbs

The Access Bike Ramp makes it easy to load your bike onto your Kuat NV 2.0 hitch rack.

Replacement lock cores Kuat Racks lock systems. Comes with lock cores, keys, and 1 core removal tool. This part is not made for Kuat's NV rack, Sherpa rack, or any other hitch mounted rack.

Kuat Racks Phat Bike Kit. This item includes the strap extender for the rear tire strap and a secondary Velcro strap for the front tire.

RackDock from Kuat. A sophisticated solution for storing your hitch rack. Easy wall installation and the ability to hold up to 100lbs keeps your hitch rack secure and out of the way in the garage, preventing damage to the rack, cars, and of course—bikes. - Supports up to a 4-bike rack (100 lb max) - All hardware included - 2" hitch and 1.25" hitch adaptor included - Magnetic faceplate

Transfer cable lock kit including one locking cable per tray and a matching lock for the hitch pin.

Thru-axle adapter for the Kuat TRIO rack.

So the international bike builder didn’t consider your bike rack design when creating his new full suspension frame? No worries. Kuat’s Ubar can adapt almost any frame to fit our Alpha or Beta rack. Features - Adapts oddly shaped frames for use with hanging style racks - Spring loaded for a solid fit - Coated hooks (prevent wear on your bike) - Installs in seconds - Fits most bikes