Parts & Accessories
• Synthetic elastomer gasket with 2X the holding power and 5X wear resistance of traditional gasket materials • Two stage seal design, improves sealing and stability on all presta valve stems • Adjustable compression, user can tighten the cap to increase holding power by 4X and compensate for wear •15 degree stem angle reduces stress on the valve stem from pump hose • 12.0g
$9.00 - $14.99
Zipp's Valve Extension extends your threaded Presta valve to accommodate deep dish rims. Use these extenders with your favorite Zipp wheels to make short work of pumping up your tires.
Precision engineered for precise inflation of your Zipp wheels, these Zipp Tangente Valve Extenders take the hassle out of short Presta valves. - For use with threaded Presta (non-removable core) tubes - Knurled end to keep pump from slipping - Available in all lengths to match all Zipp wheels - 3mm hex broach in the barrel to guarantee a perfect seal when tightened
Tubeless valves for use with Whisky Tubeless rims and most other systems. - Steel valve stems for use with Whisky tubeless rims and most others - 35mm length - Fits up to an 8mm valve hole - Removable valve core - Sold as a pair
$10.99 - $16.99
You'll ride with peace of mind when you pack a can of Vittoria's Pit Stop Tire Sealant. It contains pure latex foam sealant and compressed air to quickly inflate and repair your tire so you can get on with your ride. Available in three sizes for varying tire volumes: - Road Racing: inflates 21-28-inch tubulars up to 94 psi and 700c clinchers up to 87 psi so you can ride, instead of walk to the closest pump and top off the tire to full pressure. - MTB 50 mL: Repairs and inflates low-volume MTB tires in less than a minute. - MTB Magnum 75 mL: Repairs and inflates meaty 27.5-inch tires and cross country 29-inch tires in less than a minute.
$22.99 - $29.99
- Fully removable aluminum valve - Anodized red color - Intended for use with 320 tpi Vittoria tubular tires, Rubino Pro inner tubes, and latex inner tubes - 42mm, 60mm, 80mm, and 110mm lengths - Sold as a pair
- Ingenious snap-In plugs do the work of rim tape at 1/3 The weight - Makes tire installation easier and nipple repairs faster than with tape - Red plugs fit rims with 8mm holes - Yellow plugs fit rims with 8.5-9.3Mm holes
The Next Level in Sealing Power from the People who Invented Tubeless Conversions If you've walked the mechanics' pits at any National or International level event, chances are you've seen them: trademark Stan's black quart bottles with no labels. Look closer and you might have seen strange symbols scrawled all over the bottles in a silver marker, letters and numbers, formula notes by the man himself, Stan Koziatek. For nearly fifteen years Stan has been quietly formulating a special racing version of our legendary sealant for many of cycling's most successful teams. Working with athletes who push themselves and their tubeless systems to the absolute limit, he developed a proprietary sealant formula with close to twice the amount of the standard sealing crystals plus special "XL" crystals capable of sealing even larger punctures. Stan's Race Sealant's combination of large and smaller sealing crystals interlock to form a lattice work that not only seals but strengthens and reinforces the area of the puncture, allowing for an entirely new level of sealing performance. The quantity and size of crystals in this special formula means that Stan's Race Sealant can only be installed directly into the tire. As a result of its immense sealing capabilities, the Race Sealant will clog injectors and smaller bottles almost immediately. Stan's has made Race Sealant available to riders everywhere, and it is only available by the quart. - First choice of riders around the world for tubeless conversion and flat prevention - Twice the amount of Stan's standard sealing crystals - "XL" crystals capable of sealing even larger punctures - Stays liquid 2-7 months for long-lasting protection - Premium low-viscosity formula resists freezing to work in environments as cold as -30° F (-34° C) - Natural materials, safe for the environment
$3.99 - $28.00
The Product that Started a Tubeless Revolution Inside this simple bottle is a product that changed cycling. Today's tubeless systems rely on the lighter, more reliable, self-sealing performance of Stan's Tire Sealant. Just two ounces of Stan's in a converted standard tire or tubeless tire can repair punctures up to 1/4-inch almost instantly to keep you rolling. Longer-lasting Stan's Tire Sealant is formulated to stay liquid in tires with even thin casings for up to seven months. Arid conditions require more frequent monitoring of sealant levels, but anti-freezing agents in our special formula allow Stan's Tire Sealant to be used in temperatures as cold as -30° F. One quart will convert up to 16 tires. - First choice of riders around the world for tubeless conversion and flat prevention - Seals punctures up to 1/4-inch (6.5mm) quickly - Stays liquid 2-7 months for long-lasting protection - Premium low-viscosity formula resists freezing to work in environments as cold as -30° F (-34° C) - Natural materials, safe for the environment - Can be injected through valve stems with removable cores compatible with tubes and tubular tires
$8.00 - $26.00
Our new 2Bliss Ready Tire Sealant was custom-designed in partnership with a leading laboratory for tire sealants, and it also underwent extensive real-world testing with our Factory Athletes. What we developed is an innovative, ecological formulation that's the answer to the requirements that riders like you've been demanding. It will immediately seal punctures up to 6mm, whether it be on a road or mountain tire, as well as across global temperatures [-20° to 70°C]. Natural, micro holes in the sidewalls will seal well, and the system is safe for use with latex inner tubes, even inside tubulars. Please note that this sealant is ammonium-, protein-, and latex-free, so it holds no potential for allergic reactions, and there's no risk of it creating damage to bike parts. - Proven by our Factory Team Athletes. - Seals punctures up to 6mm. - Performs in a wide temperature range (-20° – 70°C). - Works in latex inner tubes inside tubulars. - Ammonium-, protein-, and latex-free, so there's no risk of allergic reactions or damage to bike parts. Recommended sealant amount per tire: - Road: 24-32mm - 30-40ml - Open Road: 33-50mm - 50-70ml - MTN: 2.0-2.3” 80-100ml - MTN: 2.4-3.0” 100-125ml
The FlatBoy patch kit will be your best friend when road-/trail-side flat repairs are needed. It features a set of six self-adhesive patches, sandpaper to lightly roughen before applying, and instructions in a snap-shut kit. Patches conform to inner tube perfectly and the kit is compact so you can always find a spot to carry one. Don't leave home without it. - Easy to apply to your inner tube so your ride can continue on unhindered. - Glueless patches with no mess. - Six patches are housed in a small, lightweight container that fits in the smallest places.
Our new RapidAir Tire Sealant was custom-designed in tandem with our new RapidAir tires and Roval wheels to be the fastest tire setup out there. Through development, we learned that high-pressure, 24-30mm tires require a totally different formula to seal punctures. Our new exclusive mixture not only immediately seals punctures up to 3mm across a large range of temperatures, but unlike other sealants, RapidAir sealant will also keep its seal when you reinflate back to normal riding pressure. - Compatible with CO2. - Creates the strongest plug after sealing. - No damage to bike parts. - Performs in a wide temperature range (-20° - 70°C). - Recommended sealant amount per tire: Tire size 24-26mm - 40ml, 28-30mm - 50ml - - - For Maximum performance, use 60ml for any 24-30mm - Seals instantly with minimal pressure lost.
The Specialized Rim Strips provide the ultimate in protection between the rim and tube.
Roval's rim-specific Tubeless Valves are designed to match Specialized's rim profiles and provide a better seal than previous generation valves. - Constructed of lightweight aluminum - Removable valve core - Mated with a seal which is specific to different rim models: - MY14 Control SL = black rim bed shaped seal - MY15 Control Carbon/Aluminum = red rim shaped seal - MY15 Traverse SL/Aluminum = black O-ring seal
$14.99 - $32.35
Prevents thorns and other road debris from puncturing the inner tube and deflating the tire. - Packaged in a process that avoids the difficult to install "pigtails" traditionally associated with liners - Equipped with Soft-Tips that prevent friction flats at the overlapping seam - Sold in pairs
The Problem Solvers Presta Valve Extenders add 30 to 70mm of length to your tube or tire valve so that it protrudes far enough out of deep-section rims so that you can attach your pump. These lightweight, durable aluminum extenders are for use with Presta valves that have removable cores. The proper tool for removing the cores and installing the extenders is included.
These oversized Presta valve nuts are specifically designed to provide extra clearance and extra leverage to better tighten tubeless valves. They're especially helpful on single-wall rims. -Concave to allow better engagement of the valve/rim interface -Oversize to provide extra torque when tightening -Especially helpful on single-wall rim tubeless setups -CNC-machined AL-6061
• Integrated presta valve extension • Machined alloy construction • Available in 30mm, 50mm, and 70mm • For use with inner tube with removable Presta valve core
Orange Seal Tubeless Conversion Kits contain everything needed to convert a pair of 26-inch, 27.5-inch, or 29-inch mountain wheels to tubeless. - Proven to seal large punctures up to 1/4-inch and perform under varying temperatures and altitudes - Everything needed to convert a pair of 26-inch, 27.5-inch, or 29-inch mountain wheels to tubeless (except tubeless-ready tires) - Contains Rim tape, two 48mm Removable Valve Core valve stems, Removable Valve Core Tool and 8oz of sealant with twist-lock injector
$10.99 - $20.99
Endurance formula lasts twice as long as standard Orange Seal. - Premium Latex coats the whole casing, from tire bead to tread cap - Seals punctures up to 1/8-inch, and slices up to 1/2-inch with the use of Nanites - Developed to add as little weight to a tire as possible - Made of eco-friendly biodegradable ingredients
$12.99 - $66.99
Orange Seal’s rim tape comes in 18mm, 24mm, and 45mm widths fitting most bike rims. The elasticity of the tape allows greater flexibility in fitting different types of rims and form factors.
$6.99 - $19.99
Your tubeless wheels will benefit from the use of Orange Seal Tubeless Tire Sealant. It is proven to seal large punctures up to 1/4-inch and perform under varying temperatures and altitudes. Orange Seal Tubeless Tire Sealant is compatible with most bike tire systems and is eco-friendly.
$23.99 - $24.99
The VersaValve stem utilizes a large, sturdy base plate that can be fitted on different rims, by use of rubber grommets. The large base plate ensures a solid contact with the rim bed and the adaptable grommets guarantee an airtight fit on most rims for mountain, road or CX use. - Universal fit. One valve for all rim types - Replaceable grommets - Kit includes VersaValve stems, two types of grommet, extra valve cores and RVC tool
- 6061 Aluminum valve and cap - Removable valve core - 4mm allen key slot for easy installation and removal - Comes with round & square rubber bases for different rim types - Spare alloy valve cap with integrated valve core removal tool
Ultra-compact polypropylene case. Kit includes machined aluminum T-handle with combined reamer and insertion tool and five tire plugs. - Weight: 48g
Compact tubeless tire repair kit with machined aluminum storage tube that doubles as a handle. Combined tire reamer and insertion tool. Includes five tire plugs. - Weight: 47g
$6.99 - $8.99
The crowning touch for any cruiser wheel. - Decorative valve covers screw onto valve stem - Designed for standard Schrader valves only - Set of two, one for each wheel
Continental's Easy Tape High Pressure Rim Strips come in sizes to fit 700c and 650c road rims and are made of a tough, elastic and waterproof, non-adhesive nylon. This makes them quick and easy to install. Just stretch them over your rims and let them snap in place! They are also made specifically for when you're running extreme pressures and can handle up to 220 psi. Each box contains a pair of rim strips.
$21.99 - $49.99
When gluing high performance tubular tires to your high performance wheels, be sure to rely on Challenge's Universal Rim Cement. This glue is formulated to provide maximum adhesion and hold on both alumimum and carbon rims, even in high temperature conditions. Dive into high speed corners with confidence.
Grenade style Schrader Valve caps
Page 1 of 3 Next page