Parts & Accessories
$10.99 - $14.99
You'll ride with peace of mind when you pack a can of Vittoria's Pit Stop Tire Sealant. It contains pure latex foam sealant and compressed air to quickly inflate and repair your tire so you can get on with your ride. Available in three sizes for varying tire volumes: - Road Racing: inflates 21-28-inch tubulars up to 94 psi and 700c clinchers up to 87 psi so you can ride, instead of walk to the closest pump and top off the tire to full pressure. - MTB 50 mL: Repairs and inflates low-volume MTB tires in less than a minute. - MTB Magnum 75 mL: Repairs and inflates meaty 27.5-inch tires and cross country 29-inch tires in less than a minute.
Continental's Easy Tape High Pressure Rim Strips come in sizes to fit 700c and 650c road rims and are made of a tough, elastic and waterproof, non-adhesive nylon. This makes them quick and easy to install. Just stretch them over your rims and let them snap in place! They are also made specifically for when you're running extreme pressures and can handle up to 220 psi. Each box contains a pair of rim strips.
The Problem Solvers Presta Valve Extenders add 30 to 70mm of length to your tube or tire valve so that it protrudes far enough out of deep-section rims so that you can attach your pump. These lightweight, durable aluminum extenders are for use with Presta valves that have removable cores. The proper tool for removing the cores and installing the extenders is included.
$12.99 - $17.99
• 2mm TPU material with UV protection • High performance tire liners that prevent flats • Lighter and stronger than traditional liners • Two sizes available -26/29 x 1.9-2.35-inch -27-inch/700c x 18-25mm
$12.99 - $14.99
- Semi-transparent for precise application, this lightweight Rim Tape creates an airtight seal in a vital step for tubeless setups. - 18mm x 10 yards - Transparent to ensure consistent adhesion through a quick visual verification when applying the tape - Won't leave residue when changing tape - Slightly stretchy to allow for easier application - 10 yards per roll
- Designed by pros specifically for tubeless applications - Permanently seals tube punctures up to 1/8 inch - Non-toxic, non-corrosive and non-hazardous formula - Recommended 2oz per mountain tire, and 1oz per road tire - Aids to seal the bead on UST rim/standard tire and tubeless conversion set-ups
Challenge's Valve Extenders screw onto the end of Presta valves to make the valves 42mm longer so that the valves will protrude through wheels with tall rims far enough to be able to attach your pump and inflate the tires. You get two extenders and a wrench for them.
- Reusable 100ml capacity sealant transmission tool used to inject sealant into tire through the valve (sealant sold separately) - For Presta valves only, with a long tube for easier application
Precision engineered for precise inflation of your Zipp wheels, these Zipp Tangente Valve Extenders take the hassle out of short Presta valves. - For use with threaded Presta (non-removable core) tubes - Knurled end to keep pump from slipping - Available in all lengths to match all Zipp wheels - 3mm hex broach in the barrel to guarantee a perfect seal when tightened
Continental's Valve Extenders are made of durable aluminum and come in four sizes so you can attach your pump to your valve, no matter how deep your rims are.
• Integrated presta valve extension • Machined alloy construction • Available in 30mm, 50mm, and 70mm • For use with inner tube with removable Presta valve core
Designed to repair punctures up to 3mm, the Panaracer Tubeless Patch Kits work with all UST tires. - Includes: 8cc tube of cement, scissors, 75mm x 50mm rubber patch, and needle/awl - Works on any brand of tubeless tire
- Ingenious snap-In plugs do the work of rim tape at 1/3 The weight - Makes tire installation easier and nipple repairs faster than with tape - Red plugs fit rims with 8mm holes - Yellow plugs fit rims with 8.5-9.3Mm holes
When inserted between the bike tire and tube, KENDA Tube Protectors provide a protective layer between road hazards and the inner tube. The tire and the protector work together to prevent sharp objects from puncturing the inner tube. - Guaranteed to prevent flats and made in the USA! - Lightweight - Weighs less than liquid fills and thorn-resistant tubes - Easy installation - no gooey mess - Absolutely, positively, will not cause tire or tube to damage or loosen spokes - Eco-friendly and reusable from bike to bike and biodegradable when disposed
$15.90 - $21.90
- 2-ply rubber shield fits between tire and tube to prevent flats
Setting up tubeless tires can be difficult. Add a single-wall, flat profile fat rim to the equation, and the setup can be downright frustrating. Problem Solver's oversized Super P-Nut’s help with this. First, the bottom of the nut is concave, so the valve can be pulled further through the rim, creating a better seal. The larger outer diameter of the nut provides better grip and leverage so that you can get the valve tighter than with conventional nuts. It’s like a normal P-Nut. Only more super.
Tubeless valves for use with Whisky Tubeless rims and most other systems. - Steel valve stems for use with Whisky tubeless rims and most others - 35mm length - Fits up to an 8mm valve hole - Removable valve core - Sold as a pair
A good pair of valves can make a big difference in the reliability and ease-of-use for any tubeless setup. Whisky's No. 7 Brass tubeless valves help ensure your tires are dialed for every ride. And, it's always a good call to keep an extra valve in a pocket or bag. - For use with Whisky tubeless rims and most others - 40mm length - Fits up to a 8mm valve hole - Removable valve core - Sold as a pair
With a Schrader core remover on one end and a Presta remover on the other, you can’t go wrong with this zinc alloy valve core remover tool. Threads apart in the middle and contains two Presta cores with a rubber o-ring for a watertight closure. - Presta/Schrader tool with valve core storage inside - Made from zinc alloy - Includes (2) Presta valve cores - 80mm x 10mm/3.15 x .39-inch - An essential accessory when converting to a tubeless system.
- Inflates a tire and stops leaks in 90 seconds or less - Presta compatible - For use with tubed or tubeless tires - ORM-D: Pressurized liquid restricted from shipping by air
$19.00 - $25.00
No.9 Tubeless valves for use with Whisky Tubeless rims and most other systems. These alloy stems feature removable Presta cores and are designed to fit up to 8mm valve holes. - Available in a number of lengths and colors to perfectly fit your rims and your sense of style. - Includes two valves
$19.90 - $23.90
- Half the weight of the original Mr. Tuffy Tire Liner - Rubber shield fits between tire and tube to prevent flats - Back of the liner is serrated to keep it in place inside the tire and curved to match the profile of the tire
Protect’Air Max is a PH neutral latex-based sealant that can be used for Road Tubeless and MTB tires. It has two functions. When used with Tubeless Ready tires, it seals the casing (MTB or road). Secondly, it acts to repair small (1-2mm) punctures that perforate the casing of the tire. If there is a puncture, the sealant acts to fill the hole and repair the tire. Note: It may not repair larger punctures. Use - For road tires add 30ml of Protect'Air Max - For MTB tires add 40ml of Protect'Air Max - Each 2-3 months, add 10-20 ml to refresh the sealant already in the tire. - 120ml bottle includes one-way valve cap that makes injection through the valve easy without any other tools - Very neutral PH—won't corrode rims
Compact tubeless tire repair kit with machined aluminum storage tube that doubles as a handle. Combined tire reamer and insertion tool. Includes five tire plugs. - Weight: 47g
The FlatAway tire liner is a lightweight strip of Aramid fiber that protects against external punctures. It is excellent for touring or urban applications. Place it between your casing and your tube and ride with more security. - Adhesive backing holds FlatAway in place
Bigger than standard Presta valve nuts, the Big P-Nut is designed to provide extra leverage to better tighten tubeless valves on standard tubeless rims. - Over-sized design provides extra torque when tightening - CNC-machined from AL-6061 aluminum - Kit includes two 40mm long brass tubeless valves
Roval rim-specific tubeless valves are designed to match rim profiles and provide a better seal than previous generation valves. - Constructed of lightweight aluminum - Removable valve core - Mated with a seal which is specific to different rim models: - MY15 Control Carbon/Alloy = red rim shaped seal - MY14 Control SL = black rim bed shaped seal - MY15 Traverse SL/Alloy = black O-ring seal - MY18 Control SL = black O-ring seal and 50mm valve length
Roval's rim-specific Tubeless Valves are designed to match Specialized's rim profiles and provide a better seal than previous generation valves. - Constructed of lightweight aluminum - Removable valve core - Mated with a seal which is specific to different rim models: - MY14 Control SL = black rim bed shaped seal - MY15 Control Carbon/Aluminum = red rim shaped seal - MY15 Traverse SL/Aluminum = black O-ring seal
$20.00 - $34.99
The MTN Tube Spool is a simple, compact system that'll carry everything you need to fix a flat without weighing you down. To do so, its design allows for a spare tube, with up to a 48mm valve stem, to be rolled-up without damaging the tube. Meanwhile, the Spool can easily hold a lever, CO2 cartridge, and a valve head. - Patent-pending design allows the spare tube to be rolled up while protecting valve stem from rubbing a hole through the rubber. - CO2 valve head and two-sided tire lever snap into place for compact and secure storage. - Holds a single threaded 25g CO2 cartridge. - Fits up to 48mm long tube valve stems. - Hook and loop strap can slide side to side to accomodate all different size mountain tubes
- Individual vulcanizing patches in bulk - Cement and sandpaper sold separately