Parts & Accessories

$112.99
- Cassette Body Type: Shimano/SRAM 8, 9, 10 Speed (Red), Campagnolo 10/11 Speed (Blue)
- Material: Aluminum

$136.00
This 11-speed freehub is only compatible with model-year 2013 (V8) and 2014 (V9) Zipp wheelsets. Check that your hub has a black end cap before using this freehub. Use the spacer for compatibility with 10-speed Shimano and SRAM drivetrains after installation.
The red freehub is designed for SRAM or Shimano drivetrains and includes a spacer for 10-speed compatibility. The blue freehub is designed for Campagnolo drivetrains. The Campagnolo version requires one 0.25mm axle washer, which is included.
- 10 to 11-speed wheel conversion can only be completed by an authorized Zipp Service Center
- Not intended to convert older 10-speed freehub wheels to 11-speed freehub wheels
- Only intended to swap freehub compatibility (SRAM/Shimano - Campagnolo) with current 11-speed wheels
- Includes cassette spacer
- Material: Aluminum

$7.00
Package comes with two pieces of rim tape for use with the Zipp clinchers. Woven nylon material. Tape is extra thin with a thickness of 0.5 mm.
Note: For Zipp 700c and 650c aluminum/carbon hybrid clichers, use the 16 mm rim tape. For Zipp 30 wheel set use 18mm but for the wider Firecrest and Firestrike carbon clinchers use the 20mm x 1/2mm rim tape.

$363.00
- Kits include Freehub body with CeramicSpeed bearings pre-installed for easy installation onto the wheel
- Measurable wattage savings between 1.5 and 9 watts per bearing set, depending on the level and condition of your existing bearings

$363.00
- Lowest resistance hybrid ceramic (ceramic balls and steel cages) available
- Measurable wattage savings between 1.5 and 9 watts per bearing set, depending on the level and condition of your existing bearings
- Kits include Freehub body with CeramicSpeed

$149.99
Each bag holds one wheel (up to 700c with 35mm cyclocross tire) for transport. It also connects to a second Zipp Connect wheel bag (sold separately) to form a double wheel bag.
- Sturdy, water-resistant EVA construction with distinctive molded Zipp graphics.
- Integrated carry handle and detachable shoulder strap.
- Removable internal pocket for storing quick-release skewers and axle end caps.
- Padding holds wheel in place.

$190.00
Zipp Speed Weaponry Rear Axle Conversion Kit
- Not to be used on 188 V6 or earlier rear hubs
- Only to be used to convert Zipp's 188 V7 10-speed rear hubs to 11-speed

$205.00
Zipp Speed Weaponry Rear Axle Conversion Kits
- Converts a road disc into a track disc rear
- Fits black 2013 188 V8 disc hubs only
- Fits Zipp 900 and Super-9 Discs

$176.00
Zipp Speed Weaponry Rear Axle Conversion Kit
- Converts a road disc into a track disc rear
- Disc must have silver, NOT black flanges
- Fits 188 disc hub only - cannot be used on 900 or Sub-9 discs
- Fits Zipp Super-9

$24.99
These die-cut borderless decals provide a distinctive look to go with the distinctive sound and aero-advantage of Zipp wheels rolling at 45km an hour. Zipp’s Matte white and Matte black decals also are still available. Each decal kit has seven decals sufficient to cover one wheel and two matching valve-hole decals.
Note: Before applying the decals, make sure the rim surface is free of dirt and debris. We recommend a gentle wipe with acetone or rubbing alcohol. Peel the white backing sheet from the decal, orientate, position and gently press the decal onto the rim surface. Starting at one end, remove the surface clear cover slip and then work the decal into the dimples using a 3M squeegee.

$6.00
A simple solution for completing the Zipp aerodynamic package by covering the valve access hole on most disc wheels. Black, self-adhesive oval patches with the Z logo, in a package of five.

$20.00
Help ensure your rotors are not damaged, contaminated in transit, or in storage with this simple solution. This also helps protect anything that may come into contact with the rotor during transport.
- Protects rotors during transit
- Neoprene cover to protect against water and grease
- Reinforced gusset and drawstring to protect the edges of the rotor and to cinch down tightly during transit

$64.99
Protect your wheels from scratches and dings with Zipp's Wheel Bag. It's designed to hold one wheel inside a padded pocket, and it features a stuff sack for race supplies.
Note: This bag is not rated for airline travel. If you do choose to fly with this bag, Zipp recommends removing the skewers from your wheels and padding the wheels with additional materials, especially if you’re carrying a disc.

$71.00
- Holds one wheel securely for transport (up to 700c with 35mm CX tire installed).
- Connects to second Zipp Connect wheel bag to transform into a double wheel bag.
- Sturdy water-resistant EVA construction.
- Includes removable axle/QR pocket.

$50.00 - $91.00
Match your Beyond Black hubs, spokes and decals (each sold separately) with skewers from Zipp.
- Sold in pairs
- Stainless steel: 85 grams/set
- Titanium: 78 grams/set

$7.00
Zipp Speed Weaponry Valve Extender Wrench Set
- Two 4 mm and 5 mm combination wrenches
- Replacement wrenches required to properly install Zipp integrated valve extenders
- Use with Zipp Tangente tubes with aluminum Presta valve and aluminum valve extender

$39.95
Ultra-light, bolt-on thru axles, with a low profile 6mm allen head for use on Whisky and others forks. They are also available in some common rear frame sizes. See manufacturers specifications for fitment questions.
- Over Locknut (mm): 100 (FK8004); 142 (FS8108)
- Axle Diameter (mm): 12
- Thread Length (mm): 12
- Thread Pitch: 12x1.5mm
- Color: Black
- Weight: 26g (FK8004); 34g (FS8108)

$39.95
Ultra light bolt on thru axle, with a low profile 6mm head for Whisky forks and some others. See other manufacturers specifications for fitment questions.
- Thread Length (mm): 12
- Thread Pitch: 1.5
- MT/CX: 125 x 15mm
- MTB+: 135 x 15mm
- Fat: 198 x 15mm
- RD/CX: 120 x 12mm
- Rear: 167 x 12mm

$15.99
Tubeless valves for use with Whisky Tubeless rims and most other systems.
- Steel valve stems for use with Whisky tubeless rims and most others
- 35mm length
- Fits up to an 8mm valve hole
- Removable valve core
- Sold as a pair
Page 1 of 9
Next page